Products

HNT-DX-7000

Specification
Stroke 105mm
Speed 375 RPM (maximum)
Hydraulic Power 118kW
Weight 850 kg (approx)
Performance Data (Continuous Service)
Liquid End Arrangement Plunger Diameter Discharge Pressure Displacement at 100 RPM
M mm kg/cm2 PSI LPM m3.hr.
45 321 4565 50 3.00
50 260 3698 62 3.72
55 214 3043 75 4.50
60 180 2560 89 5.34
L 65 155 2204 104 6.24
70 132 1877 121 7.26
75 115 1635 139 8.34
80 100 1422 158 9.48
85 88 1251 178 10.68

Note:Higher pressures are available on request.
The performance data furnished is based on 100% volumetric efficiency considering test media as water at 30° C with the intension to be refered initially for preliminary purposes.

The RPM shall be selected considering the other parameters like Viscosity, Specific Gravity, Abrasiveness, Vapour Pressure, Temperature & NPSH available.

Pump Dimensions (mm)

  • Flanges (according to ANSI B 16.5) shown as per standard version.
  • Other arrangements can be offered as per requirements.
Arrangement Overall Dimensions(mm) Flanges
A B C D E In Our
M 375 120 107 949 1239 3" 2"
L 455 145 128 955 1300 4" 2.5"
Typical Pumping Unit

  • - The overall dimensions are tentative and are based on medium installed power unit.
  • - Approximate weight : 2100 Kg.

Note: HIRO NISHA reserves the right to change the above data without any obligation for the pumps already sold or subsequently sold.